HP StorageWorks 2.32 Edge Switch - Manual (Page 162)

SANtegrity Security Center 162
Figure 96 Main window with Security tab, Authentication, IP ACL tab
If the Enable IP Access Control List check box is selected, the restricted access to the follow IP
addresses is enforced. If not checked, management interfaces can access the switch from any IP
address. The check box is enabled only if at least one IP address is in the list.
Adding a new IP address
1. Click Add.
The Add/Edit IP Address or Range dialog box displays.
2. Enter an IP Address or an IP Address Range.
The IP range is defined by a starting IP address and ending IP address.
3. Click Apply.
Editing one IP address or one range of IP addresses
1. Click Change.
The Add/Edit IP Address or Range dialog box displays.
2. Change the IP address or IP Address Range.
3. Click Apply.