HP StorageWorks 2.32 Edge Switch - Manual (Page 146)

SANtegrity Security Center 146
Figure 88 Main window with Security tab chosen
If the check box for EWS or Telnet is not selected, then no user can log into the switch through this
interface. When the interfaces are enabled, EWS and Telnet can be set to authenticate to a local
database on the switch, a Radius server, or a local database then a Radius server. If the SSH check
box is selected then all management data between the workstation and the switch through Telnet is
encrypted using the SSH protocol.
If Radius Only is selected from the drop-down list, your HAFM appliance checks the Radius
information to see whether or not any Radius server has been specified. If not, the application
prevents the user from selecting this option and a message displays.
If the Radius server is already set, the security administrator is alerted that the user information on
the Radius server needs to be entered manually, because that information cannot be populated
automatically by the HAFM appliance.
Assigning users to a switch
For the user role, there are two options available from a drop-down list, Administrator and
Operator. The ID of the user is Administrator and the password is password. The third and fourth
column indicate whether a user has access to the switch through the EWS or Telnet interface, or
through both of them.