HP ProLiant BL660c Gen8 Server Blade - Manual (Page 29)

Hardware options installation 29
3. Remove the server blade (on page 13 ).
4. Remove the access panel (on page 14 ).
5. Remove all drives (" Remove a drive " on page 14 ).
6. Remove all DIMM baffles (" Removing DIMM baffles " on page 14 ).
7. Remove all FBWC capacitor packs (" FBWC capacitor pack options " on page 39 ).
8. Remove the front panel/drive cage assembly (on page 16 ).
9. Remove the heatsink blank. Retain the heatsink blank for future use.
10. Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.