ACR Electronics Nauticast Y1-03-0212 - Manual (Page 44)

Installation Manual 40 Y1-03-0212 Rev. E
Select Submenu 1 “General Settings” with cursor button [Up] & [Down] by pressing Nr. 1 on
the keyboard.
Scroll the Data Fields with [Enter] and input own vessel data. Enter draught in meter (max. =
20.0m), and air-draught value in centimetre (max. = 4000cm) as well as the correct
navigational status setting. Running AIS in high sea mode allows draught of 25.5m
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. Press [Back] to return to the Main Menu without saving any changes.
Select Submenu 2 “Cargo/Voyage Settings” with cursor button [Up] & [Down] or by pressing
Nr. 2 on the keyboard.
Toggle the values for the ERI ship type (see section 7.1), the hazardous cargo by the
number of Blue Cones [0-3, B-Flag, Default/Unknown], and the loaded / unloaded status Un/
Loaded [Loaded, Unloaded].
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. The ERI ship types, which are used in Inland message 10, are automatically converted
to the IMO types which are used in IMO message 5 (refer to section 7.1.).Press [Back] to
return to the Main Menu without saving any changes.
N 1 o 18' E 0 o 12' |1>0.01|2>1.30|3>1.80nm
***********General Settings*************
SOLAS Draught:>=20.0m
Airdrauht :>=4000cm
NavStat. :
----------------------------------------
| Save | | | Exit
N48°12' E 16°26' |1> N/A|2> N/A|3> N/Anm
******** Cargo/Voyage Settings *********
ERI ship type :
Blue Cones : Default/Unknown
Un/ Loaded : Default/Unknown
----------------------------------------
| Save | | | Exit