HP Mini 5101 - Manual (Page 68)

Setting stringent security
To enable stringent security in Computer Setup, follow these steps:
1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select Security > Password options, and then press enter .
3. Use the arrow keys to select Enable in the Stringent security field.
4. Read the warning. To continue, press f10 .
5. To enable the feature each time the computer is turned on, press f10 .
6. To save your preferences, use the arrow keys to select File > Save changes and exit. Then follow
the instructions on the screen.
Your preferences go into effect when the computer restarts.
58 Chapter 5 Security