HP NonStop G-Series - Manual (Page 109)

Safeguard User’s Guide— 422089-009
C- 1
C
SAFECOM Command Syntax
This appendix summarizes the syntax of the SAFECOM commands presented in this
manual. The commands are listed in alphabetical order.
In every command that manages a system object, object-type can be omitted if it is
the current assumed object type.
Remember that SAFECOM reserved words can be abbreviated. Typically, a reserved
word can be abbreviated to its first three characters unless a longer abbreviation is
necessary to distinguish between similar reserved words.
For a more thorough coverage of syntax, including examples, see the Safeguard
Reference Manual.
Common Syntax Elements
The following syntax elements are common to many SAFECOM commands:
user-spec
can be any of the following:
group-name . member-name
group-name . *
* . *
group-num , member-num
group-num , *
* , *
net-user-spec
can be any of the following:
[\node-spec.]group-name . member-name
[\node-spec.]group-name . *
[\node-spec.]* . *
[\node-spec.]group-num , member-num
[\node-spec.]group-num , *
[\node-spec.]* , *
node-spec
has the form:
* | node-name
node-name
specifies the system name.