Avanti W892F User Manual

Page 14

choose zero delay start time and press down the Start/Pause button.

PRESS DOWN START/PAUSE BUTTON ONCE AND THE MACHINE WILL BEGIN OPERATION.
Press to start and pause the washing programs.
During operation, time countdown can be seen in LED display.
When the program is finished, open the door and remove the laundry.

NOTE: The door will not open until 3 minutes after the appliance stops or the power turns off.
The Door Locked indicator lights whenever the door is locked and unable to open.

NOTE:

Clothes easily discolored should be washed separately so as to prevent inter-dyeing.

If you want to change a selected program, please press the START/PAUSE button first, then
press the corresponding buttons to set the program before pushing START/PAUSE button.

When SPIN and RINSE+SPIN cycles are ON, do not use detergent.

If you want to drain water during washing, press the START/PAUSE button, then select SPIN
cycle. Press START/PAUSE button again to restart.

DELAY START SETTING

Select this course when you have to go out or do something else.

Press down the power button.

Load the washing machine and select the appropriate wash program.

Press Delay Start button continuously to select the delay start time. (From 1 hour to 24 hours)

Press START/PAUSE button to start the course.