Start update, Status, Start update 6-18 – HP Integrity NonStop H-Series User Manual
Page 82: Status * 6-18, Command, with a det
SDR Commands
HP NonStop SQL DDL Replicator User’s Guide —545799-006
6-18
START UPDATE
the SDR monitor process. Subsequently, all messages are sent to the EMS
collector.
PRIMARY cpu-number
a cpu-number (in the range of 0 to 15) of the primary monitor processes.
PRIORITY process-priority
the priority (in the range of 1 to 199) for the monitor process.
UPDATE { HOLD | OFF }
instructs the monitor to start (or not start) the SDR updaters.
If UPDATE HOLD is specified, the updaters are started in the HOLD state.
If UPDATE is omitted or UPDATE OFF is specified, the monitor does not start
the SDR updaters.
The default is OFF.
START UPDATE
Starts the SDR updater that manages the specified RDF configuration (or all SDR
updaters).
SDR updaters that are already executing are not affected by this command.
RDF-control-subvol
an RDF configuration in the format node[suffix-character] that replicate the SQL
objects that are the target of DDL operations managed by the SDR updater.
If RDF-control-subvol is omitted, all SDR updaters are started.
HOLD
instructs the monitor to start the updater(s) in the HOLD state.
STATUS *
Combined form for STATUS SDR, STATUS RDF, and STATUS UPDATER.
DETAIL
adds RDF volume information, the list of Defines and the text of the last DDL
statement performed by the SDR updater to the display.
START UPDATE [ RDF-control-subvol ] [, HOLD ]
STATUS * [, DETAIL ]