HP StorageWorks 2.64 Director Switch - Manual (Page 105)

Viewing Product and Fabric Data
105 Embedded Web Server User Guide
— No Principal Switch
— No Response from Attached Switch
— ELP Retransmission Failure Timeout
— If Operational State is Invalid Attachment :
— Unknown
— ISL connection not allowed on this port
— ELP rejected by the attached switch
— Incompatible switch at other end of the ISL
— External loopback adapter connected to the port
— N_Port connection not allowed on this port
— Non-HP high availability fabric switch or compatible switch at other
end of the ISL
— ISL connection not allowed to external Fabrics
— Port binding violation — unauthorized WWN
— Unresponsive node connected to Port
— If Operational State is Inactive :
— No Serial Number
— No Key Enabled
— Switch Speed Conflict
— Optics Speed Conflict (Director 2/64 and Director 2/140 only)
— No SBAR Support (Director 2/64 and Director 2/140 only)
■ Technology
Identifies the technology used for the following aspects of the port:
— Connector Type — The type of connector: LC , MT_RJ , MU , Unknown ,
or Internal Port .
— Transceiver — The type of transceiver: Longwave Laser (LC) ,
Shortwave Laser , Shortwave Laser with OFC , Longwave
Laser (LL) , Long Distance Laser , Unknown , or None .
— Distance Capability — General distance range for port transmission:
Short , Intermediate , Long , Very Long , or Unknown .