HP 15-d099nr TouchSmart Notebook PC - Manual (Page 18)

Checking the sound
To check the system sound on your computer, follow these steps:
1. Click the System menu icon at the far right of the top panel, and then click System Settings >
Sound icon.
2. Click the Sound Effects tab, and then select one of the sound options under Choose an alert
sound to test each sound.
To check the recording functions of the computer, follow these steps:
1. Click the System menu icon at the far right of the top panel, and then click System Settings >
Sound icon.
2. Click the Input tab, and then select Line in or Internal Microphone from the Record sound from
panel on the left side of the window.
3. Adjust the input volume by moving the Input volume slider to the desired setting.
NOTE: For best results when recording, speak directly into the microphone in a setting free of
background noise.
To confirm or change the audio settings on your computer, click the Sound menu icon at the right of
the top panel.
Using video
Your HP computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer, without needing to
access a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV. Most computers have a video graphics array (VGA) port, which
connects analog video devices. Some computers have a DisplayPort, which connects an optional
digital display device, such as a high-performance monitor or projector. Also, some computers have a
high-definition multimedia interface (HDMI) port, which allows you to connect a high-definition monitor
or TV.
IMPORTANT: Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Check the device manufacturer's instructions if you have questions.
Connecting a VGA monitor or projector
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computer's VGA port.
NOTE: Adjust the screen resolution of the external device. Click the System menu icon at the far
right of the top panel, click Displays, and then select a resolution from the drop-down menu next to
Resolution. Click Apply to apply any changes.
To connect a monitor or projector:
1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as
shown.
10 Chapter 3 Enjoying entertainment features