beautypg.com

Optical drive option – HP ProLiant ML10 Server User Manual

Page 32

background image

Hardware options installation 32

c.

Connect the fan cable to the system board.

23.

Install the front bezel (on page

14

).

24.

Install the access panel (on page

14

).

25.

Return the server to an upright position.

26.

Connect the power cord to the server.

27.

Connect the power cord to the power source.

28.

Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.

Optical drive option

1.

Press the Power On/Standby button.
The server powers down and enters standby mode. The system power LED changes from green to
amber. Power is still applied to the server.

2.

Disconnect the power cord from the power source.

3.

Disconnect the power cord from the server.

See also other documents in the category HP Computer hardware: