Deactivating rules, Deactivating an existing rule, Deactivating a new rule – HP StorageWorks 2.32 Edge Switch User Manual
Page 148: Turning the event management feature on or off
Optional Features
148
Deactivating Rules
Deactivating an Existing Rule
1. Click the Event Management tab on the main window. The Event
Management tab displays, as shown in
2. Choose the rule you want to deactivate from the Rules table.
Note:
To select a non-contiguous set of rules, press CTRL and click each rule.
Note:
All active rules are marked with green flags.
3. Click Deactivate. A confirmation dialog box displays.
4. Click Yes. The green flag disappears from the Active column.
Deactivating a New Rule
1. Verify that the Active check box on the Add Rule or Edit Rule dialog box is
not selected.
2. Click OK. The Active column does NOT display a green flag.
Turning the Event Management Feature On or Off
1. Click the Event Management tab on the main window. The Event
Management tab displays, as shown in
2. Click On or Off in the top right corner of the page.