HP ProLiant BL420c Gen8 Server Blade User Manual

Page 27

Text mode
Original mode

Hardware options installation 27

CAUTION:

Do not press down on the processor. Pressing down on the processor may cause

damage to the processor socket and the system board. Press only in the area indicated on the

processor retaining bracket.

12.

Press and hold the processor retaining bracket in place, and then close each processor locking lever.
Press only in the area indicated on the processor retaining bracket.

13.

Remove the thermal interface protective cover from the heatsink.

CAUTION:

To avoid damage to the system board, processor socket, and screws, do not

overtighten the heatsink screws. Use the wrench supplied with the system to reduce the possibility
of overtightening the screws.