Adjusting the monitor settings 29 – HP L1950 19-inch LCD Monitor User Manual
Page 35

Icon
Main Menu
Submenu
Description
Disable/Enable Auto-
Switching
Enables or disables the system's automatic video
signal input-switching feature. The factory default is
enabled.
Default Video Input
Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Digital — DVI — Selects DVI input.
Information
Selects and displays important information about the
monitor.
Current Settings
Provides the current input video mode.
Recommended
Settings
Provides the recommended resolution mode and
refresh rate for the monitor.
Serial Number
Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
Version
Reports the firmware version of the monitor.
Backlight Hours
Reports the total hours of backlight operation.
Service Support: http://
www.hp.com/support
Factory Reset
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Exit
Exits the OSD menu screen.
Table 4-2
OSD Menu (continued)
Adjusting the Monitor Settings
29