HP StorageWorks 2.32 Edge Switch - Manual (Page 186)

SANtegrity Security Center 186
If you modify a CHAP Secret for a non-local server on the Software tab, a message is displayed
indicating you are about to modify the CHAP Secret of this HAFM appliance the switch's local
database. The message also says to check the Server Properties dialog box for this switch and
make sure the secret is updated accordingly. If you fail to do so, this appliance cannot manage
the products any more.
2. Edit the CHAP Secret.
3. Click OK to return to the Software tab.
Removing another HAFM appliance
Although you can remove software IDs from the Permitted Software List, you cannot remove the last
entry in the list while the API authentication is enabled.
Enabling OSMS authentication
OSMS is a PFE key-dependent feature. If the license key is not installed, then OSMS authentication
is not available.
Applying changes and confirmation
To apply the change:
1. From the Software tab, click OK on the Apply or Apply To dialog box.
The Security Change Confirmation and Status dialog box is displayed. This dialog box is
similar to the dialog box that is displayed from the Users tab. The only difference is the Detailed
Change table. This table displays the difference between the current settings of the Software tab
and the to-be-populated new settings. The behavior of this dialog box is the same as the dialog
box for the Users tab.
2. Click Start.
If there are no security settings being changed and you click Apply or Apply To, the To Security
Change Confirmation and Status dialog box is displayed with a message indicating no changes
were found. Click Start and a message is displayed in the Status window indicating the security
settings are identical and that there are no changes to apply.
Using the Devices tab
The Devices tab ( Figure 114 ) defines which switches and directors are eligible to mutually
authenticate with the highlighted switch on the top table. The features on the Devices tab can be
configured only if the switch has the proper PFE key installed. If not, when you click the Devices
tab, a message is displayed, indicating that the feature has not been installed.