HP Integrity NonStop H-Series - Manual (Page 31)

Troubleshooting
M8705A Tape Drive Installation and User’s Guide — 694638-001
5 -7
Encryption LED
Encryption LED
The encryption LED may be blue or amber, as described in the following table. The
state of the other LEDs depends upon the activity, as described below.
Table 5-2. Encryption LED
Encryption LED (Blue or Amber) State
On At power on
Off The drive is idle and there is no encryption key.
Off with Ready flashing green The tape drive is reading/writing unencrypted data
from another host or unloading a cartridge.
On (solid blue) The drive is idle but the encryption key is loaded.
The drive is ready to read/write encrypted data.
On (solid blue) with Ready flashing
green The drive is reading/writing encrypted data.
Alternate flashing, blue and amber There is an encryption related error. This is cleared
after unload executes or successful
encryption/decryption resumes.