HP Integrity NonStop H-Series - Manual (Page 18)

Operation
M8705A Tape Drive Installation and User’s Guide — 694638-001
4 -4
Using the Correct Media
Using the Correct Media
For best performance it is recommend to use HP branded media.
LTO Cartridge Media
The following are tips to ensure maximum LTO cartridge media performance and life:
1. Place labels only in the recessed area, just above the write protection switch (See
Figure 4-4 ). Never place labels on the top, bottom sides or rear of the cartridge,
they can cause loader faults and interfere with normal operations. Such labels can
come off inside the equipment causing damage.
2. Always inspect cartridges for incorrect or improperly attached labels.
3. Never erase information on a cartridge label, always replace the label.
Note. Barcode labels may be placed on the media with the alphanumeric characters on the
left or the right.
Figure 4-4. Barcode Label Installation (LTO)