beautypg.com

Owner’s guide – Ultra Start 45xx Series User Manual

Page 6

background image

Page 6

1. Press and hold button #2 and the doors will unlock, continue holding

button #2, the trunk release will activate. The trunk release will be
confirmed by one park light flash and one siren chirp.

Note: The trunk release output will not activate when the ignition key

is in the “On” position.

1.Press and release button #1 on the remote transmitter.
2.The park lights will flash and the siren will chirp one time.
3.The doors will lock.
4.The LEDs on the antenna will start flashing within five seconds.

Note: If installed, the starter disable will activate.
* To Lock/Arm without chirps, press #1 and #2 at the same time.

1.Press and release button #2 on the remote transmitter.
2.The park lights will flash and the siren will chirp two times.
3.The doors will unlock.
4.The LEDs on the antenna will stop flashing.

Note: If installed, the starter disable will deactivate.
* To Unlock/Disarm without chirps, press #1 and #2 at the same time.

1. Press and release button #2 on the remote transmitter. The park

lights will flash, the siren will chirp two times and the drivers door
will unlock.

2. Press and release button #2 again and the remain doors will unlock.

Note: Button #2 must be pressed a second time within 3 seconds.

Lock Doors and Arm Alarm

Unlock Doors and Disarm Alarm

Priority Unlock Feature (Optional Feature)

Trunk Release

1 2 3

4

1 2 3

4

1 2 3

4

1 2 3

4

OWNER’S GUIDE

2way REMOTE STARTER/ ALARM