Figure 11: assigning a route for ip trunks – AT&T NORTEL BCM50 User Manual

Page 19

Text mode
Original mode

AT&T IP Flexible Reach Service

Nortel BCM50 Release 3.0 SIP Configuration Guide

© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T
logo and all other AT&T marks contained herein are trademarks of AT&T
Intellectual Property and/or AT&T affiliated companies. All other
marks contained herein are the property of their respective owners.

Under

Configuration Æ Telephony Æ Dialing Plan Æ Routing

: Select the

“Routes” tab and ensure there is an entry for “BlocA.” In this case “001” is

the route number and the DN type is specified as “National.” See figure below.

Figure 11: Assigning a Route for IP Trunks

Issue 0.7

Page 19 of 37