ADC ML-75 - Manual (Page 19)

17
Telephone: (508) 678-9000 Fax: (508) 678-9447
Tumbler Bearing Assembly (continued)
Illus. No. Part No. Qty. Description
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 150621 2 5/16-18 x 1-1/2” Hex Head Machine Bolt
15 152004 2 5/16-18 Hex Nut
16 801107 1 1-3/8” Bearing Box Magnetic Sensor Assembly Complete
(includes illus. nos. 4 through 20)
For Models Mfd. without Rotational Sensor
(for models mfd. as of April 12, 1999)
801101 1 1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
For Models Mfd. without Rotational Sensor
(for models mfd. prior to April 12, 1999)
801103 1 1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
801105 1 1-3/8” Bearing Box ONLY
17 801104 1 Pillow Block Bearing Support ONLY
18 880202 1 1-3/8” Pillow Block Bearing with Nylock Setscrew
880779 1 1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. with optional rotational sensor)
19 152004 2 5/16-18 Hex Nut
20 150610 2 5/16-18 x 1-1/2” Allen Setscrew
21 101100 1 18” Pulley
(for non-reversing models Only)
101118 1 18-3/4” Pulley
(for reversing models Only)
22 101119 1 1-3/8” Taper Lock Hub (key not included)
For Reversing Models ONLY
23 154301 2 5/16-18 x 5/16” Allen Setscrew
(for non-reversing models Only)
24 100713 1 1/4” x 1/4” x 7/8” Key
(for non-reversing models Only)
100735 1 Shaft Key (for taper lock hub)
For Reversing Models ONLY
25 100106 1 5L-690 V-Belt (basket [tumbler] to idler)
26 824807 1 Rotational Sensor Assembly
(for models mfd. with optional rotational sensor)
* As required.