HP Serveur lame HP ProLiant BL680c G5 - Manual (Page 36)

To disable Port 2301, complete the following steps:
1.
Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, clear the Enable Port 2301 check box.
5. Click Apply.
To enable Port 2301, complete the following steps:
1.
Select Settings from the menu
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, select the Enable Port 2301 check box.
5. Click Apply.
Timeouts category
The Timeouts link provides options to configure the values of the Session timeout and UI timeout.
3 2 1 Apply:
Records the chosen values
into the XML configuration
file.
UI timeout: The UI timeout
value represents the
maximum amount of time in
seconds that the SMH user
interface (UI) waits for data Session timeout: The session
timeout value represents the
amount of time in minutes
that a user can remain
inactive in an SMH session.
requested from webapps. If a user logs in and remains
Users with Administrator inactive for an amount of
access can set the session time greater than that
timeout to between 1 and specified by session timeout,
60 minutes. The default the user is redirected to the
value is 15 minutes. Users Sign In page in their next
with Administrator access interaction with the user
interface.
can set the UI timeout to
between 10 and 3600
seconds. The default value
is 20 seconds.
The following table presents the range of values available for timeouts, with their respective units:
Table 4 Timeout settings
Range Timeout
1 †60 minutes (Windows and Linux) Session timeout
10 †3600 seconds UI timeout
36 The Settings page