Wireless projection, Setting up your wpg, Connecting to the wpg for the first time – Acer PD523P User Manual
Page 35
33
... English
Wireless projection
Setting up your WPG
Check the LED for the power status.
• Red indicates that the WPG is receiving power, but is inactive.
• Green indicates that the WPG is being used to project images.
You may also like to connect a LAN cable to the LAN (RJ-45) port on the side
of the dongle. This will allow you to connect to the Internet to retrieve inter-
active content or download firmware upgrades as they become available.
Connecting to the WPG for the
first time
If this is the first time you’ve connected to the WPG, you will need to
download and install the driver from the WPG. The software is stored
on the WPG, so there is no need for an installation CD. Ensure that
you have administrator-level permission on your computer so that
you can install the software.
To download the software, you must ensure that your browser
is set to open up a website. If your browser is set to open with a
blank page, you will not be able to download the software. To
check this, select Tools > Internet Options. Ensure that there is a
website in the text box.