HP LD4730 47-inch Micro-Bezel Video Wall Display - Manual (Page 22)

Change an Association
Administrator Mode allows the user to change the association of any display with any player. The process is
very similar to making an association with an available display (Ready to Connect) in User Mode, except the
user may choose any Connected display on the list. To change an association and connection:
1. Select the display whose association and connection are to be changed by clicking on the association
box.
Figure 3-23 Select Display to Change Association and Connection
2. The Change Association dialog box appears. Click on the pull-down menu which shows all the players in
the network. Select the new player to associate and connect with this display. Click OK to keep the new
association and make the new connection between the display and changed player.
Figure 3-24 Select the New Player for Association and Connection
18 Chapter 3 Operating VOE