HP LD4730 47-inch Micro-Bezel Video Wall Display - Manual (Page 32)

1. Log on as an Administrator.
2. Highlight the display to be upgraded. It must have the status Ready to Connect.
3. Press the Update Firmware button on the Administrator Mode menu.
Figure 3-45 Update Firmware
4. VOE opens the Windows dialog to browse for the directory of the firmware binary file that was
downloaded by the user.
Figure 3-46 Browse for Directory of Firmware Binary File
5. After locating the firmware file, highlight the file and click Open. The process of downloading to the
display begins immediately. When this process finishes, a message pops up to indicate the status of the
firmware update. After successful update of the display VOE firmware, the VOE hardware is
automatically restarted with the new firmware running.
28 Chapter 3 Operating VOE