Abocom WU5214 - Manual (Page 48)

- 44 -
WPS
WPS information contains Authentication Type, Encryption Type, Config
Methods, Device Password ID, Selected Registrar, State, Version, AP Setup
Locked, UUID-E and RF Bands.
Authentication Type: There are four types of authentication modes supported by
RaConfig. They are Open, Shared, WPA-PSK, WPA securities, WPA2-PSK and
WPA2.
Encryption Type: For open and shared authentication mode, the selection of
encryption type are None and WEP. For WPA, WPA2, WPA-PSK and
WPA2-PSK authentication mode, the encryption type supports both TKIP and
AES.
Config Methods: Correspond to the methods the AP supports as an Enrollee for
adding external Registrars.
Device Password ID: Indicate the method or identifies the specific password that
the selected Registrar intends to use.
Selected Registrar: Indicate if the user has recently activated a Registrar to add an
Enrollee. The values are "TRUE" and "FALSE".
State: The current configuration state on AP. The values are "Unconfigured" and
"Configured".
Version: WPS specified version.
AP Setup Locked: Indicate if AP has entered a setup locked state.
UUID-E: The universally unique identifier (UUID) element generated by the
Enrollee. There is a value. It is 16 bytes.
RF Bands: Indicate all RF bands available on the AP. A dual-band AP must
provide it. The values are "2.4GHz".
Close: Click this button to exit the information screen.
CCX
CCX information contains CCKM, Cmic and Ckip information.
Close: Click this button to exit the information screen.