Declaraciones sobre normativa inalámbrica, Declaration of conformity – HP Impresora e-Todo-en-Uno HP Photosmart Plus - B210a User Manual
Page 64
HP Photosmart Plus e-All-in-One B210 series declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
DoC #: SNPRB-1001-01-RevA
Supplier 's Name:
Hewlett-Packard Company
Supplier 's Address:
declares, that the product
138 Depot Road, #02-01, Singapore 109683
Product Name and Model: HP
Photosmart
Plus
All-in-One
Series
-
B210
Regulatory Model Number:
1)
SNPRB-1001-01
Product Options:
All
Radio Module:
RSVLD-0707 (802.11g /b)
Power Adapter:
0957-2271
conforms to the following Product Specifications and Regulations:
EMC: Class B
CISPR 22:2005 / EN55022:2006 +A1:2007 Class B
CISPR 24:1997 +A1:2001 +A2:2002 / EN 55024:1998 +A1:2001 +A2:2003 Class B
EN 301 489-1 V1.8.1:2008-04 / EN 301 489-17 V.1.3.2:2008-04
IEC 61000-3-2:2005 / EN 61000-3-2:2006
IEC 61000-3-3:1994 +A1:2001 +A2:2005 / EN 61000-3-3:1995 +A1:2001 +A2:2005
FCC CFR 47 Part 15 Class B / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003
Safety:
IEC 60950-1:2001 / EN60950-1:2001 / EN 62311:2008
IEC 60825-1 Ed. 1.2:2001 / EN 60825-1 +A2 +A1:2002 (LED)
Telecom:
EN 300 328 V1.7.1:2006-05
Energy Use:
Regulation (EC) No. 1275/2008
ENERGY STAR® Qualified Imaging Equipment Operational Mode (OM) Test Procedure
Regulation (EC) No. 278/2009
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006 / 95 /EC, the EMC
Directive 2004 / 108 /EC, the EuP Directive 2005 / 32 /EC, the R&TTE Directive 1999 / 5 /EC and the
European Council Recommendation 1999 / 519 /EC on the limitation of Electromagnetic fields to the general
public, and carries the
marking accordingly.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and
test reports, this number should not be confused with the marketing name or the product numbers.
Singapore,
December 11, 2009
Hou-Meng Yik, Manager
Product Regulations Manager
Customer Assurance, Business Printing Division
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
www.hp.com /go /certificates
Declaraciones sobre normativa inalámbrica
Esta sección contiene la siguiente información normativa correspondiente a productos inalámbricos:
Capítulo 10
62
Información técnica
In
form
ación
téc
n
ica