HP Integrity rx4640 Server - Manual (Page 21)

Understanding the Deployment Server 21
Job default settings
Unless otherwise indicated in the job name, the job uses the following default settings. For details
about how to customize these default settings, see the “Customizing the ProLiant and Integrity
Integration Modules” section in this guide.
Hardware configuration settings
Table 3 Hardware default settings
Component Default setting
System ROM Factory defaults
Smart Array Based on the number of attached drives
iLO Not configured in the standard jobs
SAN HBA Not configured in the standard jobs
Operating system scripted install settings
The provided Windows scripted install jobs use the default configuration parameters listed in Table 4
Windows default settings .
Table 4 Windows default settings
Component Default setting
Windows administrator
password The administrator password is password
.
This password is stored as clear text in
the unattend answer file. HP recommends changing the default administrator
password within the unattend answer file located in the .\lib\osconfig\yyyy
directory on the Deployment Server, where yyyy is the operating system shortcut
name.
Drive configuration A single partition is created automatically that expands to the full drive size.
Computer name The Windows computer name uses the 15 right-most characters of the display
name shown in the Deployment Server Console.