HP Impresora HP Designjet serie L65500 - Manual

Users Guide Addendum: Dynamic Color registration…
Available for the HP Designjet L65500 (firmware version 14.2.2.1 and IPS 3.5 or greater).
From the IPS, located in ‘Printer > Dynamic color registration…’
Dynamic color registration reduces the issue of color mis-registration, which is caused by the substrate expanding or
shrinking, this is achieved through a manual calibration, explained later. The calibration involves two steps:
• Printing a test pattern,
• Selecting settings to correct the error in the Internal Print Server.
What is Color Misregistration
Lines are horizontally misaligned, in the direction of the carriage, towards the center of the substrate. The mis-registration
of these lines are different at each side of the roll, and cannot be corrected with a Printhead Alignment. The examples
shown here are Magenta, because they are the most visible, but misregistration can also occur with the other colors,
although they are not as prominent: Magenta & Cyan, Yellow and Black , Yellow and Cyan.
A A A A
To use the new feature and reduce Color Mis-registration, use the following procedure:
1. Select the Printer menu and scroll down to ‘Dynamic color registration’.
2. The following screen is displayed, select ‘Print’ to print the ‘Dynamic Color Registration test pattern’.
Example:
1
B A
Change this
to +14