Using hp sim, All systems window, Step 1: verify target systems window – HP Integrity rx4640 Server User Manual
Page 10

If no teams are configured on the source server, no teaming information is transferred, and
configuration of the target system consists of configuring individual NICs only.
Using HP SIM
To replicate network configuration settings from source server to target server, complete the
following steps:
1.
From the HP SIM home page, select All Systems to display all servers in the All Systems
window
Figure 1-1 All Systems window
2.
Select the desired target systems from the list.
3.
Select Configure > Replicate Agent Settings from the menu. The Step 1: Verify Target
Systems page appears with the selected targets listed
Figure 1-2 Step 1: Verify Target Systems window
NOTE:
If the systems selected are not compatible with the Replicate Agent Settings tool,
the Tool launch OK? column provides a brief explanation of the problem. To change the
targeted list, click Change Targets. To remove the selected system, click Remove in the
Keep? column.
4.
Click Next. The Step 2: Choose Source System window appears
10
Replicate Agent Settings tool