HP L1910 19-inch LCD Monitor User Manual
Page 31

To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the
-/Auto
button on the monitor front panel.
●
You can also press the
Menu
button, then select Image Control from the OSD Main Menu.
Refer to
Adjusting the Monitor Settings on page 25
in this chapter.
●
If the result is not satisfactory, continue with the procedure.
3.
Insert the CD in the disc drive. The CD menu is displayed.
4.
Select Open Auto-Adjustment Software. The setup test pattern is displayed.
5.
Press the
-/Auto
button on the monitor front panel to produce a stable, centered image.
6.
Press the
ESC
key or any other key on the keyboard to exit the test pattern.
Using the Auto-Adjustment Function
23
This manual is related to the following products:
- L1945w 19-inch Widescreen LCD Monitor L1750 17-inch LCD Monitor L1908wm 19-inch Widescreen LCD Monitor L2445w 24-inch Widescreen LCD Monitor L2245wg 22-inch Widescreen LCD Monitor L1908w 19-inch Widescreen LCD Monitor L1950g 19-inch LCD Monitor L1710 17-inch LCD Monitor L1945wv 19-inch Widescreen LCD Monitor L2208w 22-inch Widescreen LCD Monitor L1950 19-inch LCD Monitor