HP L1506x 15-inch Non-Touch Monitor User Manual

Page 25

Scroll down and highlight and select Sleep Timer > Set Current Time.

NOTE:

You must set the current local time before you reset the time for Sleep Time or On

Time. Note that the time is displayed in a 24–hour clock format. For example, 1:15 p.m. is
displayed as 13 hours 15 minutes.

A power failure or loss of power to the monitor will cause the timer to reset to 00:00. If this
occurs, you will need to reset the sleep timer mode.

Press the

button once to enter the adjustment mode for hours.

Press the

–

(Minus) or

(Plus) button to adjust the hour.

Press the

button again to enter the time for minutes.

Press the

–

(Minus) or

(Plus) button to adjust the minutes.

Press the

button to lock in the time chosen.

10.

After setting the current time, the highlight automatically skips to Set Sleep Time. Repeat steps
6 through 9 to set Sleep Time.

11.

If you do not want to set Sleep Time, press the

button twice, then select Save and

Return to exit the menu.

12.

After setting Sleep Time, the highlight automatically skips to Set On Time. Repeat steps 6
through 9 to set On Time.

13.

Set the Timer mode to On to activate the Sleep Timer settings.

14.

When you are finished, select Save and Return to exit the menu.

The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep mode
until the next On Time activates or a monitor button is pressed.

ENWW

Sleep Timer Mode