HP Серия принтеров HP Designjet T1300 ePrinter - Manual (Page 8)

2 Setup requirements
1. Make sure that your product is correctly connected to the Web. At the front panel, press ,
then , then Connectivity > Connectivity wizard.
NOTE: If you cannot see the Connectivity wizard in the Connectivity menu, please upgrade your
firmware manually to the latest version and try again. See Update the firmware on page 14 .
2. When the Connectivity wizard has finished, make sure that you have the latest firmware for your
product. Press
, then , then Firmware update > Check now. If the check finds a
new firmware version, please install it to take advantage of the latest features.
ENWW 3
Setup