LG HR570S - Manual (Page 103)

103 Appendix
7
Appendix
Audio Output Specifications
Jack/Setting
Source
Analogue
Output Stereo
Digital Output (DIGITAL AUDIO OUT) * 5
PCM Stereo/ PCM
Multi-Ch
Re-encode * 3 * 6 Primary Pass-Thru * 1
Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital
Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital
DTS PCM 2ch PCM 2ch DTS DTS
DTS-HD PCM 2ch PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Jack/Setting
Source
Digital Output (HDMI OUT)
PCM Stereo PCM Multi-Ch Re-encode * 6 Primary Pass-Thru * 1 * 2
Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus
Dolby TrueHD PCM 2ch PCM 7.1ch DTS Dolby TrueHD
DTS PCM 2ch PCM 5.1ch DTS DTS
DTS-HD PCM 2ch PCM 7.1ch DTS DTS-HD
Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 5.1ch
Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS Linear PCM 7.1ch * 4
*1 The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output] option is set to [Primary
Pass-Thru]. (Except LPCM Codec : the output
always include interactive and secondary
audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [Primary
Pass-Thru].
*3 The [Primary Pass-Thru] setting of the
[Digital Output] option and [Re-encode]
setting of the [Digital Output] option
cannot be set together. If you set them
together, the [Digital Output] option is set
to [PCM Stereo] automatically.
*4 The LPCM audio recorded at 192kHz
sampling frequency will be outputted as
stereo sound.
*5 On the PCM audio output, the sampling
frequency of Digital Output is limited to 96
kHz.