AMX MAX-AVP User Manual
Page 18
Installation
12
MAX-AVP Audio-Video Player
4.
Carefully remove the top of the chassis. The rack-ears will mount to the sides of the top section of
the chassis.
5.
Insert the four mounting posts on the rack-ear into a matching set of holes on the chassis, with the
rack-mounting holes on the rack ears facing forward and away from the chassis (FIG. 5).
6.
On each of the four mounting posts, install washers and secure with a nut (FIG. 6):
a.
Place a flat washer on the mounting post, so that it rests against the inside surface of the chassis.
b.
Place a split lock-washer on top of the flat washer.
c.
Place a nut on top of the split-lock washer and secure.
Repeat these steps for the three remaining mounting posts.
7.
Repeat steps 5 and 6 to install the other rack-ear on the other side of the chassis (FIG. 7).
FIG. 5
Insert the four mounting posts on the rack-ear into a matching set of holes on the chassis
Rack-ear
MAX-AVP chassis
(top section - top view)
front
Side panel of chassis
Insert the 4 mounting posts on the
rack-ears into a matching set of holes
on the chassis
There are several rows of holes on the top section of the chassis that can be used for
installing the rack-ears. In this example, we’ll use the second row of holes from the
front to facilitate securing the washers and nuts
FIG. 6
Install the flat washer, split lock-washer and nut to each of the four mounting posts
Rack-ear
Side panel of chassis
nut
split lock-washer
flat washer