Altec Lansing Octiv AIR A11964 R07 - Manual (Page 7)

7
Remote Control
1 STANDBY/ON key
Turns on the M812 or places it in standby mode.
2 MUTE
Mutes the speaker.
3 MASTER VOL +/– keys
Press to adjust the volume of several speakers when
they are all synchronized with the transmitter base. If you
have only one speaker, these keys operate the same as
+/– keys on the ring of controls on the lower part of the
remote and the volume controls on the side of the
speaker.
4 BASS +/– keys
Adjusts the bass tones of the speaker up or down from
-6 to +6 decibels.
5 TREBLE +/– keys
Adjusts the treble tones of the speaker up or down from
-6 to +6 decibels.
6 iPOD/FM/AUX keys
Press to select an input source.
7 1-6 keys
Used to select and set FM station presets.
To preset an FM station:
Tune to the desired FM Station. See “FM Tuning” below.
Press and hold one of the preset keys for three seconds.
The display will show PRESET and the number of the
preset key.
8 +/– keys
Control the volume of a single speaker.
(FR/FF) keys
For iPod:
• Press once to move to the previous or next track.
• Press and hold the key to do a fast forward or rewind.
FM tuning:
• Press once to tune to the next station.
• Hold the key for a second to SEEK (tune to the next
station with a clear signal).
• Hold for two seconds to SCAN (cycle through each
channel until you release the key).
9 (Play/Pause) key
Press to play or pause the playback of iPod. Toggles
between play and pause modes each time it is pressed.
8
10
7
6
5 4
3
2 1
9