Asus M4N68T-M - Manual (Page 60)

2-22 Chapter 2: BIOS information
2.7.4 AI NET 2
Check Realtek Phy LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
2.7.3 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item, type your
profile name and press , and then choose a profile number to save your CMOS
settings in the Save to sub-item.
Load CMOS Profiles
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press , and
choose a profile to load.
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press to run the utility.
• This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
• We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
• Only the CMO file can be loaded.
ASUSTek O.C. Profile Utility V1.44
Current CMOS Restore CMOS
C:
Note
PATH: C:\
BOARD: M4N68T-M
VER: 0203 (H:00 B:01)
DATE: 11/12/2009
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit