Audiovox Prestige APS-905 - Manual (Page 4)

128-7410
4 of 20
Page 4
T
o
exit program mode, turn ignition of
f, or press and release valet switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features: T
o
program these selectable features;
Turn ignition on
No
response
Press and release the program switch 3 times
1 flash
Within 3 seconds, turn ignition Off Then On, Off then On This Action Accesses Feature Bank 3 Remote Start Selectable Features Press transmitter lock button to change
or
Press and release the program switch
Feature Selection
1 Chirp
2 Chirps
3 Chirps
4 Chirps
5 Chirps
6 Chirps
1st Defrost Output
Not Available
2nd RF Start Chirp
Not Available
3rd Run Time
5
Mins
10 Mins
15 Mins
20 Mins
4th Parking Lights
On Steady
Flashing
5th Input Check
V
oltage
T
ach
6th V
oltage Level
>0.5V B4 Start
< 0.5V B4 Start
7th Ing. 2 Select
Off
During
Crank
On During Crank
Same As Accy
.
8th Ign. 3 Select
Off
During
Crank
On During Crank
Same As Accy
9th Diagnostics
Off
On
10th Crank Time
0.8
Sec
1.0 Sec
1.5 Sec
2.0 Sec
1
1
th Gas/Diesel
Gas
Diesel 10
Diesel 15
Diesel 20
12th Transponder O/P
While R/S On
During
Start
Until Ign. Off
13th T
emp Start
Not Available
14th Crank Averaging
Averaging
Preset Time
Note:
When averaging, the engine must be started
4 times with the key to be effective.
15th R/S Shock
Not Available
16th Turbo Select
Off
3 Mins
5 Mins
10 Mins
17th Black/Blue (Aux O/P)
Single Pulse
As Bnk 2 Feat #1
When using the RF programmer
, enter the program mode as follows:
Turn the ignition on Press and release valet/program switch 3 times turn ignition off then on Press and hold valet/program switch for 5 seconds Siren chirps 2 times indicating access to RF feature program mode T
o
exit program mode, turn ignition of
f, or press and release valet switch.