AT&T RIM BlackBerry Bold MDC 9000 - Manual (Page 22)

Automatic Callback
Note: If your telephone is connected to DEFINITY G1 or G3 or System 75, you
can use this feature for an extension that was busy or at which the person did not
answer. However, for DEFINITY G2 and System 85 users, this feature works only
when the called extension is busy.
To automatically place
another call to an
extension that was busy
or did not answer
(See above note) 1 Pick up handset
2 Press On/Off
3 Press an available line button [dial tone]
4 Press Auto Callback
or
dial the Automatic Callback access code _________
[confirmation tone]
5 Hang up by pressing On/Off (within seven seconds)
You will receive a 3-burst priority ring when the
extension you attempted to call is available
Note: After you activate Automatic Callback, the
system monitors the called extension. That
extension becomes available after the called party
completes a call.
6 Press On/Off when you hear priority ring
[ringback tone]
A call is automatically placed to an extension,
which receives regular ringing
Note: You can place only one Automatic Callback
call at a time, and Automatic Callback is canceled
after 30 minutes (for Generic 1 and Generic 3) or
20 to 40 minutes (for Generic 2), or if the callback
call is unanswered.
To cancel an
Automatic Callback
request 1 Pick up handset
2 Press On/Off
3 Press an available line button [dial tone]
4 Dial Automatic Callback cancel code _______
[confirmation tone]
17