Alpine CDA-9833 - Manual (Page 23)

21
-EN
About the indicator display (CDA-9833 only)
When displaying Title/Text, the following indicators are lit
according to the mode.
1 This indicator is lit when a folder or playlist number is
displayed.
2 This indicator is lit when a track (file) number is displayed.
3 This indicator is lit when the elapsed playback time is
displayed.
4 This indicator is lit when the temperature of the connected
external Amplifier Link compatible amplifier is displayed.
Indicator/
Mode
1
2
3
4
5
6
CD Mode
Title being
displayed
—
—
—
Text (Disc
Name) being
displayed
Text (Track
Name) being
displayed
TUNER
Mode
—
—
—
—
—
Title being
displayed
XM RADIO
Mode
—
—
—
Artist Name
being
displayed
—
Music Title/
Channel
Name being
displayed
MP3/WMA
Mode
—
Folder Name
being
displayed
File Name
being
displayed
Artist Name*
being
displayed
Album Name*
being
displayed
Track Name*
being
displayed
* Tag information
These indicators
are constantly lit.
This indicator shows the strength
of the telephone signal.
When selection is available by turning the Rotary
encoder, an indicator is lit in the display.
When selection is available by pressing g or f,
the triangle indicators are lit in the display.
6 5 4 3 2 1
1 2 3 4
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• If the title was not previously input, “NO TITLE” is displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
Titling Discs/Stations
It is possible to title your favorite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see asterisk 2 of “Displaying the Title/Text”
(page 20).
2
Press and hold TITLE for at least 2 seconds.
The first character will blink.
3
Press BAND/TEL. to select the characters/symbols.
Upper case → Lower case → Numeral/Symbol → Upper case
4
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
5
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
6
Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character (for CDA-9835 16th character) automatically
stores the title into memory.
When entering a title of less than 8 or 16 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 7 to complete the title.
Correcting the title (CDA-9835 only)
In the title input mode, press SOURCE to move the cursor
to the input title line. Turn the Rotary encoder to move the
cursor to the portion to be corrected. Press SOURCE
again to return to the title input mode, and perform the
correction.
7
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 radio station titles (24 for the CDA-9833 model)
and 18 CD titles on this unit. If you try to store beyond the limit,
the display will show “FULL DATA.” At this point, no more titles
can be stored. To input a new title, one of the previously inputted
titles must first be deleted.
• The CD Changer title length or memory capacity varies depending
upon the model being used.
• When you want to erase a title, enter a space (and symbol “ ” for
the CDA-9833 model).
• The operations described in steps 3 to 6 must be made within 10
seconds. The input mode will be canceled if no action is taken for
over 10 seconds.
About “Title” and “Text”
Title:
With this device, it is possible to input the CD/Station name
(this page). This inputted name is referred to as a “title.”
You cannot input or display titles on MP3/WMA discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as “text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (page 26) is set to “SCROLL MANUAL,”
press and hold TITLE for at least 2 seconds to scroll the Text
information only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).