beautypg.com

Getting started, When using the remote control, Remote control battery replacement – Alpine PKG-RSE2 User Manual

Page 9: Warning

background image

7

-EN

Getting Started

When Using the Remote Control

• Point the remote control at the remote sensor within

about 2 meters.

• It may not be possible to operate the remote control

if the remote control sensor is exposed to direct
sunlight.

• The remote control is a small, lightweight precision

device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.

- Do not subject the remote control to excessive

shock.

- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.

When you use Remote Control for the fi rst time, pull the plastic tape
before using the remote control.

Remote Control Battery Replacement

Battery type: AAA battery or equivalent.

1

Opening the battery case

Pull up the battery cover while pressing in the direction of
the arrow.

2

Replacing the battery

Put the battery in the case with the (+) indication upward as
shown in the illustration.

• Placing a battery in backwards way may cause a

malfunction.

3

Closing the cover

Slide the cover as illustrated until a click is heard.

Warning

DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.

Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.

Book_PKG-RSE2.indb 7

Book_PKG-RSE2.indb 7

4/8/06 2:17:04 AM

4/8/06 2:17:04 AM