AT&T 1030 - Manual (Page 46)

●
●
●
●
●
Touch Speaker repeatedly until you hear a ringing sound
you like.
Slide the T/P switch to the center position.
Speaker Speaker
+ + +
=
=
Voice Announcement Disable
Ordinarily, people can announce calls through your voice ter-
minal speaker. However, you can prevent voice announcements
and have all intercom calls ring instead.
To program Voice Announcement Disable:
Slide the T/P switch to the P position.
Touch Intercom-Voice.
Green light on voice signal allowed
Green light off voice signal prevented
Slide the T/P switch to the center position.
AUTOMATIC LINE SELECTION
This feature controls the order in which the system selects out-
side lines when you lift your handset to place a call. You can,
for instance, program the line you use most often to be the first
line in the Automatic Line Selection sequence, and a line you
use less often to be the next line the system selects. Then, when
you lift your handset, the system automatically selects the line
you usually use, if that line is not busy. If it is busy, the system
automatically selects your second choice, unless that line is
busy, and so on.
You can specify up to eight of your outside lines (both individual
and pooled) and intercom lines for Automatic Line Selection.
+ +
Intercom
Voice
45