Advanced operations, Recording to usb – LG CM9940 User Manual
Page 36

Operating
36
Oper
ating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, AUX-MIC ,PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record by
using CD, USB, TUNER, or AUX / BLUETOOTH
/ MIC. / PORT. IN on the unit or FUNCTION on
the remote control.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
JUKE BOX list recording - After showing the
JUKE BOX list, you can record it to USB.
(Refer to the page 26)
3. Press
USB REC on the unit or USB REC on
the remote control.
- If you connect both USB1 and USB2, press
T to record to USB1 or press I to record to
USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press
USB REC on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(TUNER/AUX/AUX-MIC/PORTABLE only)
y You can control recorded MIC sound
according to MIC volume when you record
in CD 1 speed REC.
y Depending on the sound recording in
MIC Input when you record in AUX-MIC
Function. (No matter the MIC volume
control.)
,
Note
To select recording bit rate and
speed
1. Press
USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3. Press
USB REC on the unit or USB REC on
the remote control again to select the recording
speed.
4. Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect another USB device to USB2.
3. Press
USB REC on the unit or USB REC on
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM9940-FB_DUSALLK_ENG_9425.indd 36
2014-03-31 �� 6:06:35