Alcatel-Lucent OmniAccess 6000 - Manual (Page 3)

3 Alcatel-Lucent OmniAccess 6000
T E C H N I C A L S P E C I F I C A T I O N S
• Detailed firewall traffic logs for usage auditing
• Application Layer Gateway (ALG) support for
NOE, SIP, SCCP, RTSP, Vocera, FTP, TFTP, PPTP
• Source and destination Network Address
Translation (NAT)
• Dedicated flow processing hardware for high
performance
• TCP, ICMP denial of service attack detection
and protection
• Policy-based forwarding into GRE tunnels for
guest traffic
• External service interface for third-party security
integration for inline anti-virus, anti-spam and
content filtering apps
• Heath checking and load balancing for
external services
VPN server features
• Site-to-site VPN support for branch office
deployments
• Site-to-site interoperability with third-party
VPN servers
• VPN server emulation for easy integration
into WLAN
• L2TP/IPSec VPN termination for Windows
VPN clients
• XAUTH/IPSec VPN termination for third-party clients
• PPTP VPN termination for legacy VPN integration
• RADIUS and LDAP server support for
VPN authentication
• PAP, CHAP, MS-CHAP and MS-CHAPv2
authentication
• Hardware encryption for DES, 3DES, AES, MPPE
• Secure point-to-point xSec tunnels for L2 VPNs
Networking features and
advanced services
• L2 and L3 switching over-the-air and
over-the-wire
• VLAN pooling for easy, scalable network designs
• VLAN mobility for seamless L2 roaming
• Proxy mobile IP and proxy DHCP for L3 roaming
• Built-in DHCP server and DHCP relay
• VRRP-based N+1 WLAN switch redundancy (L2)
• AP provisioning-based N+1 WLAN switch
redundancy (L3)
• Etherchannel support for link redundancy
• 802.1d Spanning Tree Protocol (STP)
• 802.1Q VLAN tags
WLAN switch-based
management features
• RF Planning and AP Deployment Toolkit
• Centralized AP provisioning and image management
• Live coverage visualization with RF heat maps
• Detailed statistics visualization for monitoring
• Remote packet capture for RF troubleshooting
• Interoperable with Ethereal and Airopeek analyzers
• Multi-WLAN switch configuration management
• Location visualization and device tracking
• System-wide event collection and reporting
Administration features
• Web-based user interface access over HTTP
and HTTPS
• Quickstart screens for easy WLAN switch
configuration
• CLI access using SSH, Telnet and console port
• Role-based access control for restricted
admin access
• Authenticated access via RADIUS, LDAP or
Internal DB
• SNMPv3 and SNMPv2 support for WLAN
switch monitoring
• Standard MIBs and private enterprise MIBs
• Detailed message logs with syslog event notification
Power supply options
• Power consumption: Max. 466 Watts per PSU
OAW-6000-PS200: AC power supplies deliver
200 W of power
• AC input voltage 90-132 VAC, 170-264 VAC
• AC input frequency 47-63 Hz
• AC input current 5 A @ 110 VAC
OAW-6000-PS400: AC power supplies deliver
400W of power
• AC input voltage 85-264 VAC, Auto-sensing
• AC input frequency 47-63 Hz
• AC input current 5 A @ 110 VAC
Operating specifications
and dimensions
• Operating temperature range: 0° to 40° C
• Storage temperature range: 10° to 70° C
• Humidity, non-condensing: 5 to 95%
• Height: 5.75˝ (146 mm)
• Width: 17.4˝ (444 mm)
• Depth: 12.5˝ (317.5 mm)
• Weight: 30 lbs. (unboxed)
Regulatory and safety
compliance
• FCC part 15 Class A CE
• Industry Canada Class A
• VCCI Class A (Japan)
• EN 55022 Class A (CISPR 22 Class A), EN
61000-3
• EN 61000-4-2, EN 61000-4-3, EN 61000-4-4
• EN 61000-4-5, EN 61000-4- 6, EN 61000-4-8
• EN 61000-4-11, EN 55024, AS/NZS 3548
• UL 60950, EN60950
• CAN/CSA 22.2 #60950
• CE mark, cTUVus, GS, CB, C-tick, Anatel, NOM,
MIC, IQC