LG 34UM65-P - Manual (Page 18)

ENGLISH
18 asseMblInG anD PRePaRInG
Installing the Wall Mount Plate
This monitor meets the specifications for the wall
mount plate or other compatible devices.
1 Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
2 Attach the clear sheet to the back of the moni-
tor and align it with the screw holes.
(Only 34UM65)
Clear sheet
(PeT sheet)
3 Place the wall mount plate onto the monitor
and align it with the screw holes.
4 Tighten the four screws to fix the plate to the
monitor using a screwdriver.
Wall mount plate
y The wall mount plate is sold separately.
y For more information on installation, refer to
the wall mount plate's installation guide.
y Be careful not to apply too much force while
mounting the wall mount plate as it may cause
damage to the screen
noTe
Installing on the Wall
Install the monitor at least 10 cm (3.9 inch) away
from the wall and leave about 10 cm (3.9 inch)
of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instruc-
tions can be obtained from your local retail store.
Alternatively, please refer to the manual for how to
install and set up a tilting wall mounting bracket.
10 cm (3.9 inch)
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mount-
ing bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
1 Use the screws and wall mounting bracket that
conform to VESA standards.
2 If you use screws longer than the standard
length, it may damage the inside of the prod-
uct.
3 A non-VESA standard screw may damage the
product and cause the monitor to fall. LG Elec-
tronics is not liable for any accidents relating to
the use of non-standard screws.
4 VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
5 Use the wall mount plate and fixing screws that
conform to VESA standards as specified below.
y 784.8 mm (30.9 inch) or less
* Thickness of the wall mount plate: 2.6 mm
(0.1 inch)
* Fixing screw: Diameter 4.0 mm x Pitch 0.7
mm x Length 10 mm (Diameter 0.15 inch x
Pitch 0.02 inch x Length 0.39 inch)
y 787.4 mm (31.0 inch) or more
* Use the wall mount plate and screws that
conform to VESA standards.