How to install your microsd, How to remove your microsd, Battery charge level – LG VM265 User Manual
Page 26: Card, Getting started with your phone, 24 how to install your microsd

24
How to Install Your microSD
™
Card
1. Locate the microSD
™
slot on the right
side of the phone and gently uncover
the slot opening (microSD
™
slot cover
stays attached to the phone so it is not
lost).
2. Insert the microSD
™
card facing up and
push in until it clicks into the slot. If you
insert the card in the wrong direction, it
may damage your phone or your card.
How to Remove Your microSD
™
Card
1. Remove the cover. Then push the
microSD
™
card in until it clicks, this will
eject it.
2. Remove the microSD
™
card from the
slot and replace the cover.
Battery Charge Level
The battery charge level is shown at the
top right of the LCD screen. When the
battery charge level becomes low, the low
battery sensor alerts you in up to three
ways: sounding an audible tone, blinking
the battery icon, and displaying a warning
message. If the battery charge level
becomes exceedingly low, the phone
automatically switches off and any function
in progress is not saved.
Note
Do not attempt to remove the microSD
™
card
while reading or writing to the card.
Getting Started with Your Phone
Ge
ttin
g
Sta
rte
d
wit
h
Yo
ur
Ph
on
e