LG CF181D - Manual (Page 20)

Function
20
Function
PICTURE Menu Options
* The On-Screen Display (OSD) in this manual may be slightly different from your projector.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button. Then, move to PICTURE with the ∧, ∨, ＜, ＞
buttons and press the ꔉOK button.
2. Move to a sub-item with the ＞ button. Then, use the ∧, ∨ buttons to
move to a desired function and press the ꔉOK button.
3. Use the ＜, ＞ buttons to make a desired adjustment and then press the
ꔉOK button.
• You can set image values differently for each input and Picture Mode.
• Saving after making adjustments will display (User) in adjusted Picture
Mode. (except Expert 1/2)
• Execute Picture Reset for Picture Mode to restore back to default factory settings.
• You can adjust contrast by pressing the button on the remote control.
• You can adjust brightness by pressing the button on the remote control.
• Press the MENU or EXIT button to exit the menu screen.
1. Press the MODE button on the remote control.
2. Press the ＜, ＞ button to toggle through the preset picture settings.
Picture mode
Adjusting Video
* Use the Picture mode function to set the projector for the best picture appearance.
• Each press of the ＜ , ＞ button changes the screen as shown below.
• You can use this function through the MENU button.
• To exit the menu display, press the EXIT button.
ꔗ Vivid ꔃ ꔗ Standard ꔃ ꔗ Cinema ꔃ ꔗ Sport ꔃ
ꔗ Expert2 ꔃ ꔗ Expert1 ꔃ ꔗ Game ꔃ
PICTURE
Picture Mode : Standard
• Contrast 50
• Brightness 50
• Sharpness 5
• Color 70
• Tint 0
• Picture Reset
R G
ꔂMove ꔉOK