Alpine CDA-7998 - Manual (Page 27)

25
-EN
Repeat Play
1
Press the REPEAT button to play back repeatedly the
track being played.
The track will be played repeatedly.
Press the REPEAT button again and select OFF to
deactivate the repeat play.
NOTES
• If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the disc
selected.
• In case a 6-disc or 12-disc CD changer is connected:
In CD changer mode, press the F button to display
"FUNCTION ON" (CDA-7998 only), illuminate the "FUNC"
indicator (CDA-7897 only) and go to step 1 within 5 seconds.
The FUNCTION mode is canceled if there is no operation
performed within 5 seconds.
On handling Compact Discs (CD/CD-R/
CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels and do not write on the
surface.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long
time. Never expose the disc to direct sunlight.
Heat and humidity may damage the CD and you may
not be able to play it again.
Music Sensor (Skip)
1
Momentarily press the g DN button once during CD
play to return to the beginning of the current track. If
you wish to access the beginning of a track further
back, repeatedly press until you reach the desired
track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access the
beginning of a track further ahead, press repeatedly
until the desired track is reached.
NOTE
The music sensor feature is functional in the play or pause
mode.
Fast Forward and Backward
1
Press and hold the g DN or f UP button to
quickly move backward or forward until you reach the
desired section of the track.
→ RPT → RPT ALL → (off)