LG BD390 - Manual (Page 19)

19
HDMI OUT connection
• For the 480i resolution setting, real output resolution of HDMI OUT will
change to 480p.
• If you select a resolution manually and then connect the HDMI jack to
TV and your TV does not accept it, the resolution setting is set to [Auto].
• If you select a resolution that your TV does not accept, the warning
message will appear. After resolution change, if you cannot see the
screen, please wait 20 seconds and the resolution will automatically
revert back to the previous resolution.
• The 1080p video output frame rate may be automatically set to either
24Hz or 60Hz depending both on the capability and preference of the
connected TV and based on the native video frame rate of the content
on the BD-ROM disc.
COMPONENT VIDEO OUT connection
• For the 720p, 1080i, 1080p resolution setting with protected media, real
output resolution of COMPONENT VIDEO OUT will change to 480i or
480p depending on the connectivity of HDMI cable.
• BD, DVD, Netflix, Vudu or CinemaNow video stream could prevent
up-scaling on analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always outputted at 480i
resolution.
BD390V-N_BUSALLV_MFL62344757 9/30/09 9:52 AM Page 19