Agilent Technologies J3972A - Manual (Page 136)

Cables and Connectors
116
Cables and Connectors
This appendix lists cables for use with the Agilent J3919A and J3972A OC-3
ATMProbes. The minimum connector pin-out are shown if you wish to use an
unlisted cable. Note that each connector pin-out does not necessarily match the
pin-out for the corresponding Agilent cable, but cables manufactured using at
least the minimum pin-out will function correctly.
This appendix covers the following sections:
z “OC-3 ATM Interface Cables” on page 117
z “Token-Ring Cables” on page 118
z “Serial Port Interface Cables” on page 119
z “Cable Connector Pin-Outs” on page 120