AT&T CL4939 - Manual (Page 46)

40
Caller ID operation
Use the following steps to store the telephone
number of a call history entry in a speed dial
memory location.
When the telephone is idle, press CID/ to
enter the call history.
Press
DIR
/ or
CID
/ to scroll to the desired
caller ID entry.
Press
MEM. The screen shows
ENTER LOCATION.
-OR-
If you need to add or remove the area code
or a 1 at the beginning of the number, do the
following:
Press SELECT continually to scroll through
the various dialing formats (area code +
seven-digit number, 1 + area code + seven-
digit number, seven-digit number,
or 1 + seven-digit number).
Press
MEM. The screen shows
ENTER LOCATION.
Press a dial pad key ( 0 through 9) to choose the
desired speed dial memory location to save the
displayed telephone number. The screen shows
STORED with a confirmation tone and then
returns to the call history.
Press
FLASH to return to idle mode.
NOTES:
If there is no telephone number in the displayed
call history entry when you press
MEM in step
3, the telephone plays an error tone.
If the speed dial memory location you selected
in step 4 above is occupied, the new telephone
number replaces the old one. Take caution not
to replace entries you do not wish to delete
from the speed dial memory locations.
1.
2.
3.
a.
b.
4.
5.
•
•
Storing a call history entry in a speed
dial memory location
12:00 AM 11-20 16 15
CHRISTINE SMITH
888-722-7702
12:00 AM 11-20 15
STORED
12:00 AM 11-20 15
ENTER LOCATION
_